Gigamon GigaVUE TA Series Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 108

background image

Introducing the GigaVUE TA Series

23

Dual BIOS Images

The GigaVUE-TA100 has a dual Basic Input/Output System (BIOS). The BIOS image
is packaged with the software image, starting in software version 4.6.01. The BIOS
contents are stored in flash memory, allowing the BIOS to be upgraded. There are two
flash components, a primary and a secondary.

The following CLI command displays the two flash components and indicates the BIOS
image from which the system booted using asterisks:

(config) show version

...
1st flash version: coreboot-ta100-1.0.0 Wed Aug 23 16:10:34 CST 2017 **
2nd flash version: coreboot-ta100-1.0.0 Wed Aug 23 16:10:34 CST 2017
...

If there is a component failure in the primary flash, the GigaVUE-TA100 boots from a
backup golden BIOS image in the secondary flash. An SNMP trap can be configured to
be sent when the system has booted from the secondary flash. The trap may indicate
that the primary flash component needs to be serviced. The trap is as follows:

2ndflashboot: Secondary flash boot notification

If a BIOS upgrade is needed for enhancements in future releases, the BIOS can be
manually upgraded from the CLI using the

coreboot install

command.

Stack-Links at 100Gb

The GigaVUE-TA100 can connect to the following nodes, modules, and line cards through a
100Gb stack-link:

•

GigaVUE-TA100 (SR4, LR4, and CWDM4)

•

GigaVUE-TA200 (SR4, LR4, and CWDM4)

•

PRT-HC3-C08Q08, PRT-HC3-C16, and SMT-HC3-C05 on GigaVUE-HC3 (SR4, LR4, and
CWDM4)

•

PRT-HD0-C06X24 on GigaVUE HD Series (LR4 and CWDM4 only on C06 ports)

Stack-Links to Other Node
Types

To ensure the stack-links become operationally

up

when the GigaVUE-TA100 is connected

to a node of a different type:

•

Configure specified ports as stack ports.

•

Configure the stack-link between the stack ports.

Map Rules and Port Filters

The GigaVUE-TA100 supports 256 map rules per chassis and 20 egress port filters per
chassis.

Port Licensing

On the GigaVUE-TA100, only the first 16 out of 32 ports are enabled. Two port licenses are
available to enable an additional 8 or 16 ports. Refer to

Port Licensing

for license

information to expand from 16 ports to 24 or 32 ports.

Advanced Features License

Connecting a GigaVUE-TA100 to a cluster requires the Advanced Features License.

«
...
21
22
23
24
25
...
»

Содержание GigaVUE TA Series













































































































Отзывы:

Нет отзывов

Похожие инструкции для GigaVUE TA Series

Бренд: N-Tron Страницы: 101

Бренд: Lauterbach Страницы: 61

Бренд: H3C Страницы: 6

OfficeConnect 3CP4144

Бренд: 3Com Страницы: 4

OfficeConnect 3CP4144

Бренд: 3Com Страницы: 2

Бренд: H3C Страницы: 60

Бренд: H3C Страницы: 149

Бренд: 3Com Страницы: 27

Бренд: Quatech Страницы: 27

Бренд: X-Micro Страницы: 74

Бренд: Dahua Страницы: 24

OXTOPUS EIA-709

Бренд: OCCITALINA Страницы: 54

MediaStream ConnectPlus 1000

Бренд: Avid Technology Страницы: 74

Бренд: NETGEAR Страницы: 2

Fast SwitchHub-8mi SNMP

Бренд: Accton Technology Страницы: 13

PCIe/PXIe-6301 Series

Бренд: JYTEK Страницы: 46

JetFusion 2100 Series

Бренд: Paradyne Страницы: 296

Бренд: Juniper Страницы: 420

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды