Gigamon GigaVUE TA Series, Руководство по установке оборудования

Страница: 31 / 108

Introducing the GigaVUE TA Series 31
Battery Caution
A disposable, non-rechargeable, Real Time Clock (RTC) Lithium metal coin cell battery
is in the GigaVUE-TA100-CXP. Note the following:
• There is a risk of fire if the battery is replaced with an incorrect type.
• Use only CR-2032L type Lithium metal coin cell battery and replace with the same.
Introducing the GigaVUE-TA200 Chassis
This section describes the physical layout of the GigaVUE-TA200 chassis, including a
description of all ports and connectors. The GigaVUE-TA200 chassis consists of a
2RU, rack-mountable, 19”-wide chassis with management, network, and tool ports at
the front and power connections and fans at the rear.
Figure 1-7 shows the ports at the
front of the GigaVUE-TA200 chassis. Refer to Table 1-7 for a description of each of the
ports. Figure 1-8 shows the fan modules and power supply units at the rear of the
GigaVUE-TA200 chassis. Refer to Chassis Cooling on page 34 for information on fans
and temperature monitoring.
The GigaVUE-TA200 provides sixty-four ports, supporting high-density aggregation.
Depending on the transceiver, QSFP+ or QSFP28, the ports run at speeds of either
40Gb or 100Gb. With QSFP28 SR4 transceivers, a 100Gb port can be broken out into
four 25Gb ports, called
4x25G mode. With 40G SR4, 40Gb ESR4 and PLR4 QSFP+
transceivers (QSF-502, QSF-507, and QSF-506, respectively), a 40Gb port can be
broken out into four 10Gb ports, called
4x10G mode.