Gigamon GigaVUE TA Series, Руководство по установке оборудования

Страница: 24 / 108

24 GigaVUE TA Series Hardware Installation Guide
Software Upgrade using USB Drive
If a GigaVUE-TA100 does not have network access, there is a USB port on the front of
the chassis.
A software image can be downloaded to a USB drive, the drive can be inserted into the
USB port on the GigaVUE-TA100, and the software image can be installed from the
drive. Use the format, fat32, for the USB drive.
The following are ways to download a software image to a USB drive:
• Insert the drive into your computer or laptop and drag and drop the software image
onto the drive.
• Insert the drive into a GigaVUE-TA100 with network access and use the image
fetch CLI command with the usb parameter.
Air Flow Direction
The air flow direction is from the front of the GigaVUE-TA100 chassis to the rear. The
rear-mounted fans pull air from the front to the back of the chassis. Install the chassis
so the intake air at the front of the chassis is cold.
AC and DC-Powered GigaVUE-TA100 Models
Gigamon provides both AC and DC-powered versions of the GigaVUE-TA100. Refer to
Connecting -48V DC Power Supplies on page 54 .
Battery Caution
A disposable, non-rechargeable, Real Time Clock (RTC) Lithium metal coin cell battery
is in the GigaVUE-TA100. Note the following:
• There is a risk of fire if the battery is replaced with an incorrect type.
• Use only CR-2032L type Lithium metal coin cell battery and replace with the same.
Introducing the GigaVUE-TA100-CXP Chassis
This section describes the physical layout of the GigaVUE-TA100-CXP chassis,
including a description of all ports and connectors. The GigaVUE-TA100-CXP chassis
consists of a 1RU, rack-mountable, 19”-wide chassis with management, network, and
tool ports at the front and power connections and fans at the rear.
Figure 1-5 shows the
ports at the front of the GigaVUE-TA100-CXP chassis. Refer to Table 1-5 for a
description of each of the ports. Figure 1-6 shows the fan modules and power supply
units at the rear of the GigaVUE-TA100-CXP chassis.
The GigaVUE-TA100-CXP provides twenty-eight 100Gb ports, supporting high-density
aggregation. Twenty (20) ports are 100Gb CXP ports. Eight (8) ports are 100Gb
QSFP28 ports. Depending on the transceiver inserted in the eight ports, QSFP+ or