Gigamon GigaVUE TA Series, Руководство по установке оборудования

Страница: 26 / 108

26 GigaVUE TA Series Hardware Installation Guide
Figure 1-6: The GigaVUE-TA100-CXP Chassis Rear View
Ports c1..c20,
c21..c28
or
c21x1..c21x4,
c22x1..c22x4,
c23x1..c23x4, ...
GigaVUE-TA100-CXP includes twenty-eight (28) 100Gb ports (c1..c28). Twenty (20) ports (c1..c20)
are 100Gb CXP ports. Eight (8) ports (c21..c28) are 100Gb QSFP28 ports. Depending on the
transceiver inserted in the eight ports, either QSFP+ or QSFP28, the ports run at speeds of either
40Gb or 100Gb.
With a QSFP+ transceiver, the QSFP28 ports can be broken out into four 10Gb ports, called
subports. The subports will all have the same speed (10Gb). Subports will have x1 to x4 appended to
their port ID, for example, 1/1/c21x1. For details, refer to
Configure the Port Mode on page 40 .
Once a 40Gb port has been configured to operate as four 10Gb ports, cable it to an optical patch
panel or breakout panel, such as PNL-M341, which takes a 40Gb QSFP+ input from the
GigaVUE-TA100-CXP and splits it to four independent 10Gb output ports. Refer to
Breakout Panels
on page 41 .
In software version 5.3, port breakout is only supported on 40Gb QSFP+ 40GBASE-SR4.
Transceivers For details about the supported transceiver, cable type, and connectivity specifications, refer to
“GigaVUE-OS Compatibility and Interoperability Matrix” .
Table 1-5: GigaVUE-TA100-CXP Ports
Port Description
Fan Module 1
Fan Modules and Power Supplies
GigaVUE-TA100-CXP has three (3) fan modules and two (2) power supply units (PSU).
Each fan module contains four fans per module.
Individual Fan LED
PSU Slot 1
GigaVUE-TA100-CXP Rear View
Fan Module 2 Fan Module 3
PSU Slot 2
Power LED Power LED
Power Plug Power Plug
Individual Fan LED Equipment Ground Equipment Ground