Gigamon GigaVUE TA Series Скачать руководство пользователя страница 22

Страница: 22 / 108

GigaVUE TA Series Hardware Installation Guide

Global Fan LED

The global fan LED on the front of the chassis is as follows:

•

GREEN indicates all fans are operating normally

•

AMBER indicates one or more fans have failed

Individual Fan LEDs

The individual fan LEDs on the rear of the chassis are as follows:

•

GREEN indicates the fan is operating normally

•

AMBER indicates the fan has failed

Individual Power LEDs

The individual power LEDs on the rear of the chassis are as follows:

•

GREEN indicates the PSU is operating normally

•

Off indicates the PSU is not operational

GigaVUE-TA100 Notes and Rules

Keep in mind the following notes and rules when using the GigaVUE-TA100:

GigaVUE-TA100 Notes

Transceivers

For details about the supported transceivers and cable type, refer to the

“GigaVUE-OS

Compatibility and Interoperability Matrix”

Network, Tool, Hybrid, or
Stack-Link Port

The 100Gb/40Gb ports on GigaVUE-TA100 can be used as network, tool, hybrid, or
stack-link ports. Subports created from

4x10G

mode on the GigaVUE-TA100 can function as

network, tool, hybrid, or stack-link ports.

Stack-Links at 10Gb

The 10G stacking to other GigaVUE nodes is supported when 40Gb ports on
GigaVUE-TA100 are fanned out to

4x10G

mode, but only in the following combinations:

•

GigaVUE-HC1 to GigaVUE-TA100

•

GigaVUE-HC2 control card version 1 (CCv1) to GigaVUE-TA100

•

All modules on GigaVUE-HC2 control card version 2 (CCv2), except the PRT-HC0-C02
module, to GigaVUE-TA100

•

GigaVUE-TA10 to GigaVUE-TA100

•

PRT-H00-Q02X32 on GigaVUE HD Series to GigaVUE-TA100

•

GigaVUE-TA100 to GigaVUE-TA100

Stack-Links at 40Gb

The GigaVUE-TA100 can connect to all GigaVUE nodes that support 40Gb through a 40Gb
stack-link, using SR4 and LR4 optics, with the following exception:

•

PRT-HC0-C02 on GigaVUE-HC2

Содержание GigaVUE TA Series













































































































Результаты поиска

Содержание GigaVUE TA Series

Отзывы:

Похожие инструкции для GigaVUE TA Series

Бренды по названию

Популярные бренды

Gigamon GigaVUE TA Series, Руководство по установке оборудования

Результаты поиска

Содержание GigaVUE TA Series

Отзывы:

Похожие инструкции для GigaVUE TA Series

Бренды по названию

Популярные бренды