Section 4 • Scheduled Maintenance Procedures
4 - 62
S-100 & S-105 & S-120 & S-125
Part No. 62401
REV A
January 2010
1 Open the engine side turntable cover and locate
the three filters mounted to the bulkhead.
a
high pressure filters
b
medium pressure filter
2 Place a suitable container under the filters.
3 Remove the filter housing by using a wrench on
the nut provided on the bottom of the housing.
4 Remove the filter element from the housing.
5 Inspect the housing seal and replace it if
necessary.
6 Install the new medium pressure filter element
into the housing and tighten it securely.
7 Install the new high pressure filter elements into
the housings and tighten them securely.
8 Clean up any oil that may have spilled during the
installation procedure.
CHECKLIST
D
PROCEDURES
a
b
9 Use a permanent ink marker to write the date
and number of hours from the hour meter on the
oil filter housings.
10 Start the engine from the ground controls.
11 Inspect the filter housings and related
components to be sure that there are no leaks.
Содержание S-100
Страница 1: ......