Part No. 62401
Genie S-100 • S-105 • S-120 • S-125
7 - 29
Section 7 • Repair Procedures
First Edition • First Printing
4-1
Cable Track
The cable track and boom cable tube guides
cables and hoses running up the boom. The cable
track can be repaired link by link without removing
the cables and hoses that run through it. Removing
the entire cable track assembly may be necessary
when performing major repairs that involve
removing the boom.
How to Remove the Boom
Cable Track
When removing a hose assembly
or fitting, the O-ring on the fitting
and/or hose end must be replaced
and then torqued to specification
during installation.
Refer to Section Two,
Hydraulic
Hose and Fitting Torque
Specifications.
Perform this procedure with the
boom fully stowed.
1 Remove the hose and cable cover retaining
fasteners from the jib boom leveling arm.
Remove the hose and cable cover from the
machine.
2 Remove the protective coil sleeve from the
hose and cable bundle at the platform end of
the boom cable tube.
3 Tag, disconnect and plug all hydraulic hoses
from the boom cable tube to the platform
manifold.
If your machine is equipped with
an airline to platform option and/or
weld cable option, the airline and/
or cable must be disconnected
from the platform before the cable
track is removed.
4 Tag and disconnect the black electrical
connector from the bottom of the control box.
5 Remove the platform-end boom cable tube
mounting fasteners at the engine side of the
machine.
6 Remove the cable track mounting fasteners
from the cable track support at the engine side
of the machine.
7 Remove the wear pad mounting weldment from
the cable track support bracket at the engine
side of the machine.
8 Remove the hose and cable clamp from the
cable track support bracket at the engine side
of the machine.
9 Place blocks between the cable track and the
boom cable tube for support.
10 Strap together the boom cable tube, blocks of
wood, and the cable track at the engine side of
the machine.
Component damage hazard.
Cables, hoses, boom cable tube
and cable track can be damaged if
they are kinked or pinched.
BOOM COMPONENTS
Содержание S-100
Страница 1: ......