Part No. 62401
Genie S-100 • S-105 • S-120 • S-125
7 - 54
Section 7 • Repair Procedures
First Edition • First Printing
How to Remove a Fixed
Turntable Cover
1
Ground controls side:
Remove the top
retaining fasteners from the power to platform
plug panel and loosen the bottom retaining
fasteners. Do not disconnect the wiring.
2 Support the cover with a suitable lifting device.
Protect the cover from damage.
3 Remove the cover mounting fasteners.
4 Carefully remove the cover from the machine.
Crushing hazard. The turntable
cover may become unbalanced
and fall when it is removed from
the machine if it is not properly
supported.
Bodily injury hazard. Safety decals
are essential to safe machine
operation. Failure to replace all
safety and instructional decals
could result in death or serious
injury. If a turntable cover must be
replaced, be sure that all
appropriate safety and
instructional decals are applied to
the new cover.
Alignment adjustments may be
necessary when a new cover
is installed.
TURNTABLE COMPONENTS
Содержание S-100
Страница 1: ......