Genie S-100, Руководство по обслуживанию, Страница: 64 / 497

Section 4 • Scheduled Maintenance Procedures
4 - 32 S-100 & S-105 & S-120 & S-125 Part No. 62401
REV B
January 2010
CHECKLIST B PROCEDURES
5 Push and hold a function enable/speed select
button and fully raise the boom.
Result: The platform should remain level at
all times to within ±2 degrees.
If the platform becomes out of
level, the tilt alarm will sound and
the Platform Not Level Indicator
will flash at the ground controls.
The platform level up/down buttons
will only work in the direction that
will level the platform. Level the
platform until the indicator light
turns off.
6 Push and hold a function enable/speed select
button and fully lower the boom.
Result: The platform should remain level at
all times to within ±2 degrees.
If the platform becomes out of
level, the tilt alarm will sound and
the Platform Not Level Indicator
will flash at the ground controls.
The platform level up/down buttons
will only work in the direction that
will level the platform. Level the
platform until the indicator light
turns off.
B-15
Test the Platform Self-leveling
Genie requires that this procedure
be performed every 250 hours or
quarterly, whichever comes first.
Automatic platform self-leveling throughout
the full cycle of boom raising and lowering is
essential for safe machine operation. The
platform is maintained level by the communication
between the platform level sensor and the turntable
level sensor. If the platform becomes out of level,
the computer at the ground controls will open the
appropriate solenoid valve(s) at the platform
manifold to maintain a level platform.
A platform self-leveling failure creates an unsafe
working condition for platform and ground
personnel.
1 Start the engine from the platform controls and
extend the axles.
2 Turn the key switch to ground controls.
3 Push and hold a function enable/speed select
button and fully retract the boom.
4 Push and hold a function enable/speed select
button and adjust the platform to a level position
using the platform level up/down buttons.