CHANGE NOTICE ISSUE 2.1
Version SA2.0 or higher on power up are YEAR 2000 COMPLIANT.
To ensure year 2000 compliance, these GS8920 Printers ONLY print the time and date
using an internally fitted Option BR2 time and date chip. Time and date data is no longer
accepted from weight indicators connected to the GS8920. See pages A-10 and 3-4 for
further details.
CHANGE NO TICE IS SUE 05 OF THIS MAN UAL
Methods of Clearing the TARE registers clarified. Information added to the manual
concerning the installation and use of the GS8920 Printer with the GS1650Mk3/v2
Multi-Range/Multi-Interval Indicator. These are manual change only. They apply to all
GS8920 models regardless of their software version.
Gedge Sys tems ex pressly dis claims all re spon si bil ity for the
di rect and in di rect con se quences to each and ev ery party
what so ever, in re spect of the use or ap pli ca tion of this prod uct
or any other Gedge Sys tems prod uct if it is used in any way
what so ever be yond or out side the spec i fied pur pose for which it
was sup plied.
The contents, format and authorship of all material produced
or printed by any medium, by or on behalf of
GS Systems Pty. Ltd., is the subject of strict proprietorship of
and by GS Systems Pty. Ltd., and cannot be copied,
reproduced, plagiarized or used in part or in whole either
directly or indirectly by any party whatsoever without the
prior written consent of GS Systems Pty. Ltd. This
publication, all of its parts and all matters derived from it,
forms part of such material.