2 .4 .3 .24 Eject Ticket
EJ bA
The GS8920 may be set up to eject a printed ticket to the front or back when printing is completed.
Adjustable
OFF
or eject to front
Fr
or back
bA
.
Tare en try from Key board or In di ca tor :-
2 .4 .3 .25 Tare Entry.
tE 80
The tare weight used by the GS8920 Ticket Printer may either be supplied by the digital weight
indicator or may be entered using the GS8920’s keyboard. Tare entry via the GS8920’s keyboard is
enabled whenever the selection is not OFF. The tare weight entered via the keyboard of the GS8920
Ticket Printer should not exceed the scale’s capacity. To ensure this does not happen, the GS8920
checks all key tare entries. The scale’s capacity is the number of scale divisions entered for this
parameter multiplied by the count by parameter entered below. These settings, entered here, should be
the same value as the settings that were used when the digital weight indicator to which the GS8920 is
connected was setup.
Set ting
Divs.
Set ting
Divs.
05
0500
45
4500
10
1000
50
5000
15
1500
55
5500
20
2000
60
6000
25
2500
70
7000
30
3000
80
8000
35
3500
90
9000
40
4000
100
10000
2 .4 .3 .26 Count by.
Cb 1
The count by parameter establishes the form of printout for zero weight as well as the smallest tare
weight that can be entered. In addition, when multiplied by the scale division value above, it
establishes the capacity of the scale. ( decimal places are ignored )
The GS8920 will always print zero weights as “00" for count by 10, 20 or 50 and will always print
zero weights as ”0" for count by 1, 2 or 5. Adjustable
1, 2, 5, 10, 20
or
50
Type of weight in di ca tor :-
2 .4 .3 .27 Indicator Type.
Ind. 1
The GS8920 can be connected to every Gedge Systems digital weight indicator which has a serial
output as well as to a number of other popular brand indicators.
The serial output on indicators not manufactured by Gedge Systems differs from that on the Gedge
Systems indicators. Also, to meet certain weighing codes of practice, the sign convention used in some
Gedge Systems indicators differs. Therefore, the GS8920 Ticket Printer must be told to which type of
indicator it is connected. Adjustable as shown in the following table.
Indicator
Type
GS1650
1
GS1650A
2
GS2750
2
GS1650B
2
TOLEDO
3
A&D
4 ( 3 data strings G/N/T )
A&D
5 ( 1 data string - displayed weight )
NOTE :-
The GS8920 Ticket Printer version which accepts Toledo Indicator serial input data is
available in some countries only via Toledo. To check if the GS8920 will operate with Toledo
indicators momentarily remove power from the GS8920. During power up, the GS8920 will display the
software issue and version number message in the form
Pt0.0
. The GS8920 will only accept Toledo
serial data if a
t
is included in the start up message as the rightmost character in the form
Pt0.0 t
.
Selection 5 available only on GS8920s fitted with software issue 0 version 9 or greater.
GS8920 Intelligent Ticket Printer.
2-8
