GE Precision 500D страница 193 Скачать руководство пользователя

Страница: 193 / 323

om 5184516-100 Rev. 5

7-27

2-5Digital Multi-Function OperatorCon-

trol Group

See

ILLUSTRATION 7-16

and

TABLE 7-7

DIGITAL MULTI-FUNCTION OPERATOR CONTROL GROUP CONTROLS

Item

Operator

Control

Motion

Description

Eight-Way Table Top Drive Control.

Move control in any of eight directions to drive table top
in desired direction:

• head-to-foot
• front-to-rear
• oblique

Variable speed Table Tilt Control.

Rotate Control:

•

CCW

to tilt table Trendelenburg.

•

to tilt table Vertically.

Fluoroscopy Exposure Control portion of Integrated Flu-
oro and Expose switch.

Use for rapid fluoroscopy.

Press to initiate Fluoroscopy (may be used with foot
switch).

Record EXPOSE may be initiated if this switch and the
PREP + EXPOSE bar is pressed (item 7).

Radiographic Exposure Control portion of Integrated
Fluoro and Expose switch.

Use for rapid digital record exposures.

Press to initiate both PREP + EXPOSE cycle.

Fluoroscopy Exposure Control switch (2).

May be used with foot switch.

Record EXPOSE may be initiated if this switch and the
PREP + EXPOSE bar is pressed (item 7).

Variable speed Power Assist Handle.

Grasp to move IDD vertically or longitudinally.

Longitudinal and Vertical motion is de-activated:

• During EXPOSE. Panning motion allowed during

PREP/EXPOSE cycle using

Bolus Lock

Vertical motion is also de-activated:

• While parking IDD (within 20 mm of maximum SID.

• When IDD is parked.

• When Compression Lock is activated.

FOR

TRAINING

PURPOSES

ONLY!

NOTE:

Once

downloaded,

this

document

UNCONTROLLED,

and

therefore

may

not

the

latest

revision.

Always

confirm

revision

status

against

validated

source

(ie

CDL).

Содержание Precision 500D




































































































































































































































































































































Результаты поиска

Содержание Precision 500D

Отзывы:

Похожие инструкции для Precision 500D

Бренды по названию

Популярные бренды

GE Precision 500D, Руководство оператора

Результаты поиска

Содержание Precision 500D

Отзывы:

Похожие инструкции для Precision 500D

Бренды по названию

Популярные бренды