manualshive.com logo in svg

GE Precision 500D, Руководство оператора

Поделиться
Скачать
GE Precision 500D Скачать руководство пользователя страница 93

om 5184516-100 Rev. 5

5-27

The protocol database file is stored in the same location on the system as the
other system log files.

ILLUSTRATION 5-26

CHANGES TO PROTOCOLS

3-2-1 

Parameters for Tube 1 (Fluoro) Protocol Step

For the Tube 1 Protocol Step, there is only one Receptor and there is no Patient
Size. An initial EPT (Estimated Patient Thickness) is used, with the contrast media
selected. The initial EPT is used for the first exposure and then subsequent expo-
sures use the Patient Size calculated by exposure management. The initial or
default EPT is hard coded in system software.

For the Tube 1 Protocol Step, the technique parameters that is defined by the
user for digital record are: Contrast Media, AEC / Angio, and Record Frame Rate.
If Angio, then Sub / No Sub is also defined. The technique parameters that is

When loading the default protocols the user must select the correct
Protocol CD-Rom.

The system will warn the user that specific protocols have had
modifications made to them. The user must be aware of any user-
defined protocols before accepting installation of any Protocol CD-
Roms during Protocol Retrieve. Refer to 

ILLUSTRATION 5-26

.

If protocols have been modified, and a “Default” CD is used to restore
system configuration, all of the user-defined protocols will be deleted
and must be redefined.

FOR 

TRAINING 

PURPOSES 

ONLY! 

NOTE: 

Once 

downloaded, 

this 

document 

is 

UNCONTROLLED, 

and 

therefore 

may 

not 

be 

the 

latest 

revision. 

Always 

confirm 

revision 

status 

against 

a 

validated 

source 

(ie 

CDL).

Содержание Precision 500D




































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды