2-24
5-10Patient Step
The patient step (
) provides patient convenience getting on
and off the table. The step is attached to the underside of the table body to the
right of the front support. Table angulation is prevented when the step is pulled
out. The white button must be pressed to push the step in.
ILLUSTRATION 2-2
PATIENT STEP
5-11Foot Rest
The foot rest is engaged on the table top in the same manner as shown for the
shoulder rest on
, and is designed to support a 300 lb (136 kg)
patient.
To attach:
1.
Push on the safety latches with the thumbs and spread the handles.
2.
Place the foot rest on the top adjacent to a set of slots and release the han-
dles.
3.
Slide the foot rest until both handles snap into place.
INJURY COULD OCCUR IF PATIENT STEP IS NOT FULLY OUT.
VERIFY PATIENT STEP IS FULLY ENGAGED AND ASSIST THE
PATIENT ON AND OFF THE TABLE.
TO PREVENT IMPROPER ATTACHMENT AND POTENTIAL INJURY TO
PATIENT, USE THIS FOOTREST ONLY ON THE TABLE FOR WHICH IT
HAS BEEN ADJUSTED.
Installing the foot rest at the set of slots closest to the end of the
tabletop provides easier patient boarding.
FOR
TRAINING
PURPOSES
ONLY!
NOTE:
Once
downloaded,
this
document
is
UNCONTROLLED,
and
therefore
may
not
be
the
latest
revision.
Always
confirm
revision
status
against
a
validated
source
(ie
CDL).
