manualshive.com logo in svg

GE Precision 500D, Руководство оператора

Поделиться
Скачать
GE Precision 500D Скачать руководство пользователя страница 79

om 5184516-100 Rev. 5

5-13

Acquisition screens have patient identification, procedure selected, technical fac-
tors and receptors (table bucky, digital, etc. appropriate for your system).

NOTE:

The “Select Protocols” button located in the lower left of the IUI screen returns
to the Select Protocols screen. See 

ILLUSTRATION 5-12

. This screen allows

more tests for the same patient be added. Buttons will build up denoting the
additional tests. Select each button to review the test parameters prior to
acquiring the image.

ILLUSTRATION 5-13

ACQUISITION SCREEN (1)

kVp

The arrow up/down 10 indicates that by selecting these buttons you will increase
or decrease by 10 kVp increments for each push. The up/down arrows without 10
increase and decrease by 1 for each push.

mA

The up/down arrows will increase and decrease in accordance with the focal spot
selected.

mAs/msec

If AEC is selected, the actual used factors will appear at the completion of the
exposure. If fixed is selected, you will have the ability to increase and decrease
the mAs as needed.

Patient Size

There are four selections for patient size, large medium, small adult and pediatric.

BUTTONS ARE 
ADDED IF SEVERAL 
PROTOCOLS ARE 
SELECTED

FOR 

TRAINING 

PURPOSES 

ONLY! 

NOTE: 

Once 

downloaded, 

this 

document 

is 

UNCONTROLLED, 

and 

therefore 

may 

not 

be 

the 

latest 

revision. 

Always 

confirm 

revision 

status 

against 

a 

validated 

source 

(ie 

CDL).

Содержание Precision 500D




































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды