GE PhastSystem, Руководство пользователя

Страница: 29 / 106

29
POWER FAILURE — METHOD SET TO PAUSE
An alarm will sound and the LED will blink to inform you about the
power failure.
”SEP standby temp”. Press to cool (or heat) the
separation bed before starting a separation.
A separation method does not start until the separation bed
temperature for the first step is reached. The standby temperature
enables you to have the separation bed at a given temperature also
when not running a separation. This way you gain some time at the
start of a separation. The display will show.
SEP T =22°C Tstandby = 00°C (OFF) <do>
T is the actual temperature of the bed. At the cursor you enter a
standby temperature between 0 and 70°C (most separations take
place at 15°C). Press ”do” to turn the standby temperature on or off.
The monitoring keys
”SEP real condition”: Press to monitor the progress of a
running separation method.
”DEV real condition”: Press to monitor the progress of a
running development method.
Press ”SEP real condition” to monitor the progress of the entire
method, for example, if method 1 is running, the display may look
like this:
SEP 1.3 1500V 02.0mA 3.0W 12°C 0500AVh
On the display, AVh is the number of accumulated (A) volthours (Vh)
which have elapsed during the run, that is, during steps 1.1, 1.2, and
1.3 in the above example.
Press ”SEP real condition” one more time to display the progress of
the method step currently running, in this example it is step 3:
SEP 1.3 1500V 02.0mA 3.0W 12°C 0025Vh
Press ” SEP real condition” again to return to monitoring the
progress of the entire method (AVh).
3. Description of the system