GE Logiq 500, Расширенное справочное руководство

Страница: 76 / 474

Data Management Center (DMC)
LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0
4–30

Data Management Center (DMC)
Overview
The LOGIQ

500 is capable of interfacing with a personal
computer (PC). This interface is used to send OB, GYN and
Vascular measurement and calculation data from the
LOGIQ

500 to the PC for display, processing and evaluation.
Additionally, the LOGIQ

500 can accept patient data from a
personal computer (PC) and transfer it to the patient entry
menu.
NOTE: Data Management Center transfer function will not work
if the fetus number is greater than one with the Multigestation
Option. An error message appears:
“Multigestation data transfer is not supported”
DMC data transfer will function normally if the fetus number is
set to one.
Operational Setup
The PC must be connected to Port A or B of the LOGIQ

500
by an RS-232C interface cable. “Computer” must be selected
for Port A or B on the Set Up/System Parameters page 5.
The Record 1 or Record 2 keys must be assigned to the
computer selection. The Record 1 and Record 2 presets are
found on Set Up/Systems Parameters page 5.