GE Logiq 500, Расширенное справочное руководство

Страница: 433 / 474

Storage/Print Option
LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0
9–7

Printer Setup (cont’d)
All DICOM printer specific configurations are set through the
Printer Setup Menu. The following parameters are selectable
via the Printer Setup Menu:
Parameter Values
Page Setup
Format 1x1, 2x2, 2x3, 3x2, 3x3, 3x4, 4x3, 3x5, 5x3, 4x4
Orientation Landscape/Portrait
Magnification Replicate/Bilinear/Cubic/None
Empty Black/White / 50% /Default
Border White/Black / 50% / Default
Trim Yes / No / Default
Min Density 0–500
Max Density 0–500
Medium Setup
Type Paper/Blue film/Clear/Film/Default
Page Size 8”x10”, 10”x12”, 10”x14”, 11”x14”, 14”x14”, 14”x17”,
24cm x 24cm, 24cm x 30cm
Destination Magazine/Processor/Default
Priority Low / Med / High
Configuration
Information Type A DICOM Printer Device Information
Time Out Default = 0 minutes (0–99)
The printer AE Title entered in the Network Configuration menu
will be displayed on the Printer Setup Menu. Maximum number
of printers that can be configured is seven (7).
A Force Print selection located on the menu enables the user to
print the job to the printer. With the Force Print selection, the
user has no control over the layout of the images on the film.
The images collected to that point in time will be printed.
The printer setup parameters cannot be changed if a job is
pending in the queue for that device.
Hints