GE Logiq 500, Расширенное справочное руководство

Страница: 406 / 474

VCR Operating Instructions
LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0
8–30

Ejecting the tape
When the recording is completed, stop the VCR (status icon
changes to
), then press <EJECT> to eject the tape from the
recorder. Attach a label marked with the tape ID to the tape for
storage. Rewinding the tape before ejecting will allow quicker
ID identification when the tape is reinserted.
Playback Procedure
VCR playback
To playback VCR images, press the Stop/Play key.
When playback begins, the system automatically switches to
the video mode, displaying a VCR playback image on the
monitor.
The Ext Video key is fully lit in the video mode.
If nothing is recorded on the tape and/or during playback of
non-recorded areas, the monitor displays nothing. Moreover,
pressing Stop/Play during playback to stop VCR playback will
make the screen display nothing.
Audio volume control
Use the Audio Volume control, in the Doppler/CFM section of
the keyboard, to control the VCR playback volume.
Freezing a VCR image
During the playback of VCR images, a VCR image can be
frozen by pressing Freeze.
When an image is frozen, playback with measurements is
available.