GE G30, Инструкция по эксплуатации

Страница: 619 / 698

GE Multilin G30 Generator Protection System B-107
APPENDIX B B.4 MEMORY MAPPING
B
F618
BITFIED: SECURITY STATUS INDICATOR
Has been activated, whether the password has been set.
1 = Bit#0, Administrator password was set. The list is continued for
all other roles (Engineer = bit#2, Operator = bit#3, Observer =
bit#3).
F619
ENUMERATION: RADIUS AUTHENTICATION METHOD
0 = EAP-TTLS
F621
ENUMERATION: MODBUS LOGIN ROLES
x
F623
ENUMERATION: REAL-TIME CLOCK SYNCHRONIZING
SOURCE CONFIGURATION
F624
ENUMERATION: REAL-TIME CLOCK SYNCHRONZING
SOURCE ACTUALS
F625
ENUMERATION: PTP STATE
F626
ENUMERATION: NETWORK PORT FOR REMOTE DEVICE
F627
ENUMERATION: REDUNDANCY MODE
F628
ENUMERATION: SECURITY BYPASS ACCESS
Disables security on local access, remote access, or both.
F629
ENUMERATION: SCADA PROTOCOL
0 = DNP 3.0, 1 = IEC 60870-5-104, 2 = IEC 60870-5-103
F630
ENUMERATION: IEC 103 ASDU TYPE
0 = 3, 1 = 9
F631
ENUMERATION: VIRTUAL INPUTS FOR IEC 103
Enumeration Role
0 None
1 Administrator
2 Supervisor
3 Engineer
4 Operator
5 Observer
Enumeration Item
0 None
1 PP/IRIG-B/PTP/SNTP
2 IRIG-B/PP/PTP/SNTP
3 PP/PTP/IRIG-B/SNTP
Enumeration Item
0 None
1 Port 1 PTP Clock
2 Port 2 PTP Clock
3 Port 3 PTP Clock
4 IRIG-B
5 SNTP
Enumeration Item
0 Disabled
1 No Signal
2 Calibrating
3 Synchronized
4 Synchronized (No PDelay)
Enumeration Item
0 None
1 Network Port 1
2 Network Port 2
3 Network Port 3
Enumeration Item
0 None
1 Failover
2 PRP
Enumeration Item
0 Disabled
1 Local and Remote
2 Local
3 Remote
Enumeration Item
0 OFF
1 Virtual Input 1
2 Virtual Input 2
3 Virtual Input 3
↓ ↓
64 Virtual Input 64