GE Medical Systems marquette Dash 2000 Скачать руководство пользователя страница 81 | Manualshive

Страница: 81 / 272

GE Medical Systems marquette Dash 2000 Скачать руководство пользователя страница 81

Revision C

Dash 2000 Patient Monitor

3-17

2005873-001

Combo and Rover
Combo

New Case

To discharge a patient from the Combo and Rover Combo admit menu

follow this procedure:
1.  Select MORE MENUS.
2.  Select ADMIT MENU to display the Admit Menu.
3.  Select DISCHARG PATIENT to display the following popup menu.

MAIN

MENU

DISCHARG

PATIENT

PREV.
MENU

> RETURN
MONITOR
TELEMETRY
BOTH

042B

Combo and Rover Combo Popup Menu to Discharge

4. Rotate the Trim Knob control to move the pointer (>) in front of:

a. RETURN if you do not want to discharge.

b. MONITOR to discharge patient from monitor only. If ECG was from

telemetry, telemetry will remain admitted, but will not be monitored by this
monitor. The central station will continue to monitor the telemetry.

c. TELEMETRY to discharge patient from telemetry only. ECG will

automatically switch to the monitor.

d. BOTH to discharge patient from telemetry and monitor. If ECG was from

the monitor, BOTH will only affect the monitor.

5. Press the Trim Knob control to complete the discharge.

This menu option is displayed only when the monitor is set for Operating

Room mode and is found in Standard and Rover admit menus.
This menu option clears patient information from the monitor. With no

additional steps, the monitor is ready for the next patient (new admission).
1.  Select MORE MENUS.
2.  Select NEW CASE SETUP to display the Admit Menu.
3.  Disconnect patient cables.
4.  Select NEW CASE from the Admit Menu.
5.  Press the Trim Knob control. Patient information clears and the

monitor is automatically put in the admit state, ready for the next

patient. (You will never see the ”DISCHARGED” message displayed.)

«
...
79
80
81
82
83
...
»

Содержание marquette Dash 2000

















































































































































































































































































Отзывы:

Нет отзывов