GE Medical Systems marquette Dash 2000 Скачать руководство пользователя страница 101

Страница: 101 / 272

Revision C

Dash 2000 Patient Monitor

5-5

2005873-001

If you want to move an arrhythmia call to another level for your Monitor

Default, follow this procedure. (In this example we will change V TACH

from a Crisis to a Warning level.)
NOTE: Asystole and VFIB/VTAC can only be moved when in Operating

Room Mode.

1. Rotate the Trim Knob control to move the pointer (>) up and down the

list. Stop when the pointer is in front of V TACH.

2. Press the Trim Knob control. Notice that the level for the V TACH call

is highlighted.

3. Rotate the Trim Knob control until WARNING is displayed.
4. Press the Trim Knob control to complete the change. The information

window is reorganized to include V TACH as a WARNING alarm.
The information window remains open for you to make any other

changes.

5. When you have completed all changes, move the pointer to RETURN

and press the Trim Knob control to close the information window.

Содержание marquette Dash 2000

















































































































































































































































































Результаты поиска

Содержание marquette Dash 2000

Отзывы:

GE Medical Systems marquette Dash 2000, Руководство оператора, Страница: 101 / 272

Результаты поиска

Содержание marquette Dash 2000

Отзывы: