GE Medical Systems marquette Dash 2000, Руководство оператора, Страница: 70 / 272

3-6 Dash 2000 Patient Monitor Revision C
2005873-001
Rover Admit Menu
With the Rover application, the monitor may be on a cart which allows you
to move it from one room to another. The unit name and bed number, in
some cases, may need to be changed so they are included as options in the
admit menu.
MAIN
MENU
ADMIT
INFO
XXX
PATIENT
PREV.
MENU
SET
UNIT
NAME
SET
BED
NUMBER
SET
GRAPH
LOCATION
027
ICU ADMIT Menu – Rover Application
NOTE: XXX=ADMIT if patient is discharged, DISCHARG otherwise.
MAIN
MENU
ADMIT
INFO
NEW
CASE
PREV.
MENU
SET
UNIT
NAME
SET
BED
NUMBER
SET
GRAPH
LOCATION
028
OR ADMIT Menu – Rover Application
SET UNIT NAME—verify or change the unit name.
The correct unit name
is essential for recognition at a central station and other network devices.
SET BED NUMBER—verify or change the assigned bed number.
The
correct bed number is essential for recognition at a central station and
other network devices.
SET GRAPH LOCATION—option displays a menu which allows you to
choose writers for alarm and manual graphs; refer to sections Monitor
Setup, Graph Setup, Set Graph Location.
ADMIT INFO—opens the admit information window and popup menu;
refer to section Admit Info later in this chapter.
ADMIT PATIENT–a direct action menu option that admits the patient.
DISCHARG PATIENT—opens a popup menu to confirm the discharge of
the patient.
NEW CASE—a direct action option which discharges the patient’s
information and, with no additional steps, readies the monitor for the next
patient (new admission).
NOTE: This option is found in OR mode only.
Refer to this chapter, Admit Menu Options, if you need more details on
these menu options.