GE Medical Systems marquette Dash 2000, Руководство оператора, Страница: 48 / 272

1-28 Dash 2000 Patient Monitor Revision C
2005873-001
Pressure Scales
Graphing Messages
Graph Header
Invasive pressures will always graph on individual scales as follows:
Displayed Scale Graph Scale
30 0-30 (CVP, LA, RA, ICP,PA)
40 0-45
60 0-60
100 0-90
160 0-150
200, 300 0-300
Auto 0-150 (ART, FEM, UAC, SP)
0-45 (PA, CVP, UVC, RA, LA, ICP)
Following is a list of all graphing messages and what they indicate:
SAVING—the device to which you want to print is busy or for some reason
inoperable. If it is an alarm graph, 20 seconds of data is saved until it can
print or another alarm graph occurs. The monitor only saves for print the
most recent alarm data. A manual graph is saved until you press the
GRAPH GO / STOP key or an alarm graph occurs.
GRAPHING MANUAL—a manual graph is in progress.
GRAPHING ALARM—a crisis or warning alarm has occurred. An
automatic graph is run.
PRINTING WINDOW—a manual graph of a printable information window
is in progress.
PAPER OUT—the writer/printer needs paper or a writer door is open.
NOTE: If saved graph never prints or graph does not print at your central
station, check all graph locations, then verify the graph location
settings. (Refer to GRAPH LOCATION in the Monitor Setup
chapter.)
The graph header which is printed with all patient waveforms, includes:
• type of graph (alarm or manual)
•
*alarm violation* (if any)
•
unit name, bed number, and patient name
• date and time
•
patient-monitor type label (ICU has no label)
•
alarm volume level (%)
• graph speed
•
lead failed (if any)
• heart rate
• arrhythmia call (if any and arrhythmia is on)
•
pace mode (if on)
• arrhythmia mode (off or lethal)
•
ECG filter (Hz range)
•
values for all other monitored parameters