GE Medical Systems marquette Dash 2000, Руководство оператора, Страница: 22 / 272

1-2 Dash 2000 Patient Monitor Revision C
2005873-001
Components
The Monitoring
System
Dash 2000 Monitor
The Dash 2000 patient monitor can function by itself with a built-in writer
(optional) or it can be cabled in with the Unity network via Ethernet.
Optional components are, if cabled to Ethernet, a Centralscope central
station and the Clinical Information Center.
This device is designed to monitor a fixed set of parameters including ECG,
noninvasive blood pressure, impedance respiration, SpO2, and
temperature. Invasive pressure is an optional feature.
All of the patient cable connectors are located on the right side panel of the
monitor. The screen displays patient information in a logical, easily
understood format. A Trim Knob control provides single control operation of
virtually all monitor functions.
The monitor is available in both monochrome and color.
DASH 2000
AC Battery
Power
Graph Go/Stop
NBP Go/Stop
Function
Silence Alarm
Trim Knob
Charging Status
ECG
150/ 50 21-NOV-1998 16:27
II
SPO 2
DAK.BED 1
75
SPO
2
105/ 90
RT
70
* * *
97
NBP
200/ 80
ADT
X
X X/
MORE
MENUS
+ -
Patient Cable
Connectors
Trim Knob
Control Screen
001
Monitor, Front and Side Views
The illustration above shows one invasive pressure connector (labeled BP).
This is an optional feature which your monitor may not have. References
are made to this optional feature throughout the manual. Please ignore
such references if this feature was not purchased with your monitor.