manualshive.com logo in svg

GE Medical Systems marquette Dash 2000, Руководство оператора, Страница: 3 / 272

Поделиться
Скачать
GE Medical Systems marquette Dash 2000 Скачать руководство пользователя страница 3

 

Revision C 

Dash 2000 Patient Monitor 

NOTICES-1 

 2005873-001 

 

CE Marking Information 

Compliance 

 
 
 
 
 
 
 
 
 
 

 

The Dash 2000 patient monitor bears CE mark CE-0459 

indicating its conformity with the provisions of the Council 

Directive 93/42/EEC concerning medical devices, and fulfills 

the essential requirements of Annex I of this directive. The 

radio-interference emitted by this device is within the limits 

specified in EN 55011, for class B equipment. 

The product complies with the requirements of standard EN 60601-1-2 

”Electromagnetic Compatibility – Medical Electrical Equipment”. 
The safety and effectiveness of this device has been verified against 

previously distributed devices. Although all standards applicable to 

presently marketed devices may not be appropriate for prior devices (i.e. 

electromagnetic compatibility standards), this device will not impair the 

safe and effective use of those previously distributed devices. See user’s 

information. 
 
 
 
 

 

Содержание marquette Dash 2000

















































































































































































































































































Отзывы:

Нет отзывов