manualshive.com logo in svg

GE Medical Systems marquette Dash 2000, Руководство оператора, Страница: 137 / 272

Поделиться
Скачать
GE Medical Systems marquette Dash 2000 Скачать руководство пользователя страница 137

 

Revision C 

Dash 2000 Patient Monitor 

7-7 

 2005873-001 

Technical Maintenance 

 
 
 
 
 
 
 

Technical 
Inspections 

Schematic diagrams, specifications, and other relevant technical information 
can be found in the service manuals.  Comply with the policies of your 
institution’s biomed department, or the recommendations made within the 
Preventive Maintenance section of the product’s service manual.

 

 

For safety, the devices require regular maintenance. To ensure functional 

and operational safety of the Dash 2000 patient monitor, technical 

inspections should be carried out on an annual basis. 
These inspections should be referred to independent persons with adequate 

training and experience. 
Within the framework of a service agreement, GE Medical Systems 

Information Technologies service representatives would be pleased to carry 

out these technical inspections for you. 
The relevant sections of the Field Service Manual describe the scope and 

nature of the technical inspections. 
The Dash 2000 patient monitor does not require other regular maintenance 

checks. 

Содержание marquette Dash 2000

















































































































































































































































































Отзывы:

Нет отзывов