manualshive.com logo in svg

GE Medical Systems marquette Dash 2000, Руководство оператора, Страница: 127 / 272

Поделиться
Скачать
GE Medical Systems marquette Dash 2000 Скачать руководство пользователя страница 127

 

Revision C 

Dash 2000 Patient Monitor 

6-5 

 2005873-001 

Graphic Trends 

 

Another way of displaying collected patient data is through trends.  A trend is a 
graphic representation of one parameter over a specified period of time.  Every 
non-episodic parameter is sampled 30 times a minute. A median value is 
determined and that value is stored for trend display at one-minute resolution. 
Episodic parameters (NBP, etc.) are stored every time one occurs. 

Follow this procedure to view graphic trends: 

1.  Select GRAPHIC TRENDS from the Patient Data Menu.  An information 

window and new set of menu options are displayed. 

 

HR

GRAPHIC TRENDS

27-NOV-1998   16:27

150

50

SPO2-%

100

90

MAIN

MENU

VIEW

OLDER

VIEW

NEWER

PREV.
MENU

SELECT

PARAM.

TIME

PERIOD:

90 MINS

077

The trend data will
automatically update while
displayed.  Refer to this 
chapter, Time  Period.

Press the GRAPH GO/STOP
key to print the displayed
trends.

 

GRAPHIC TRENDS Menu and Information Window 

The graphic trends for the last selected parameters are displayed.  Heart 
rate is the default if none were previously selected. 

2. 

To select other parameters for trending follow the procedure on the 
following page.

 

NOTE:  All trend data that is available at the monitor can be requested by 

a network device viewing trends, e.g., central station. 

 

 

Содержание marquette Dash 2000

















































































































































































































































































Отзывы:

Нет отзывов