GE Medical Systems marquette Dash 2000, Руководство оператора, Страница: 242 / 272

14-2 Dash 2000 Patient Monitor Revision C
2005873-001
Defib Sync/Analog Output
ECG Acquisition
Modules
The configuration for the analog output from the ECG acquisition modules
is detailed below. Analog output is obtained through the Defib Sync
connector on the rear of the monitor.
ECG ANALOG OUTPUT:
Top displayed lead including augmented leads. If pace is on there is an
enhanced pacer pulse (5 volts at 2 milliseconds) when pacemaker triggering
is detected.
In the event of a LEAD FAIL, refer to the following:
Lead Failed AHA Label IEC Label ECG Analog Out
Right arm RL R III
Left arm
LA L II
Left leg LL F I
Chest V C II
Right leg RL N Buzz*
*A right leg lead fail causes an all LEADS FAIL on the screen and a buzz is
output.
NOTES:
1. All ECG outputs are 1 volt per millivolt referred to input.
2. In single lead mode, if the specified lead is not available, a buzz will be
output.
DIGITAL SYNCHRONIZATION OUTPUT:
A digital sync output is available with a return marker. For the technical
specifications refer to appendix Technical Specifications, section Analog
Out and Defibrillator Synchronization Pulse.