MDE-4334C Atlas Start-up and Service Manual · April 2008
Page 5-21
Programming 8800 Series Units
Pump Programming
4
Press
Configuration #
.
Function Code 1: Unit Type
Defines the unit. It should always be set to
1
for Atlas.
1 = 1 product
2 = 2 product
Function Code 2: Money Decimal Point
Defines the money display format.
1 = xxxxx
2 = xxxx.x
3 = xxx.xx
4 = xxx.xxx
Function Code 3: Calculation PPU Decimal Point
Defines the PPU decimal point. Must use number
4
for US (required in U.S. as per Weights &
Measures).
1 = xxxx
2 = xxx.x
3 = xx.xx
4 = x.xxx
Function Code 4: Displayed PPU Decimal Point
Sell
configures the default value. Normally select
4
for US. If the displayed decimal point and
calculated decimal point are different, program FC 3 first.
1 = xxxx
2 = xxx.x
3 = xx.xx
4 = x.xxx
Function Code 5: STP Pre-start
Set to
On
for mechanical leak detectors or set to
Off
for most electronic line leak detectors.
Also, for self-contained pumping units, set to
Off
.
0 = Off
1 = On
Function Code 6: Beeper Option
Activates the beeper.
0 = Off
1 = On
Function Code 8: Two-wire Display Blank Option
Activation of this code allows entering of a specific preset amount to be turned Off on the
display at the dispenser using a remote POS device.
0 = Off
1 = On
Function Code 9: 5 or 6-digit Cash Display
Programs 5 or 6 digits of cash. POS must be set to the same.
0 = 5 Digit Money
1 = 6 Digit Money