manualshive.com logo in svg

Gasboy atlas, Руководство по обслуживанию, Страница: 18 / 218

Поделиться
Скачать
Gasboy atlas Скачать руководство пользователя страница 18

Read this First

Model Information

Page 1-10

MDE-4334C Atlas Start-up and Service Manual · April 2008 

Options Overview

TopKAT

™

The TopKAT Fuel Management System (FMS) can be ordered factory mounted on any 9800 
unit. This Plug and Play option increases the ease of installation and provides customers with a 
user-friendly fuel reporting system. The TopKAT system is also available as a pedestal 
mounted unit and for use with mechanical pumps.

Electric Keytrol (EK)

The Electric Keytrol can be ordered factory mounted on the 9100 series. The EK provides 
each customer with a personal key slot and totalizer to record their fueling amounts. 
Configurations are available for both single and twin units. 

Vapor Recovery

Balanced Vapor Recovery kits will be available for all K pump units. There will be two kits 
available: Vapor Recovery Complete and Vapor Recovery kit. The Vapor Recovery Complete 
kit will provide everything needed for a balanced system from the high hose retriever to the 
splitter, all the way to the nozzle. The Vapor Recovery kit is a retrofit kit used when providing 
your own vapor recovery system. This kit will provide a new nozzle boot and hook to allow a 
stage two nozzle to be mounted on the dispenser.

High Hose Retriever

High Hose Retrievers are also available for standard hoses. Hose clamps are available for a 
variety of hose sizes, up to lengths of 15".

Internal Hose Retriever

Internal Hose Retrievers are also available for all Atlas Pump models.

Satellite Piping

Satellite Piping is available on all remote dispensers and the 9850 pump. This option will 
provide the internal piping needed to connect to a 9215 or 9216 satellite dispenser.

Hand Crank

Hand Cranks are available for installations in locations where power availability is a concern. 
This option is only available for suction pumps.

- 2 Grades, 2 
Hoses

T

W

2

Pump or Dispenser

- Combo

T

W

3

- Pump

0

- Dispenser

X

Hydraulic 
Configuration

- 1 Grade, 1 Hose

Blank

Blank

Blank

- 1 Grade, 2 Hoses

T

W

1

- 2 Grades, 2 
Hoses

T

W

2

- Combo

T

W

3

Gasboy Atlas Model Code

Содержание atlas



























































































































































































































Отзывы:

Нет отзывов