Gasboy atlas Скачать руководство пользователя страница 42

Страница: 42 / 218

Preventive Maintenance and Inspection

Preventive Maintenance Table

Page 4-14

MDE-4334C Atlas Start-up and Service Manual · April 2008

Wax pump/
dispenser

Every six months or
once a month in
harsh areas

Note: Gasboy

recommends
more frequent
waxing for
pumps/
dispensers
located in
salty or
corrosive
environments,
such as near
the ocean or
near pollution
sources.

Wax metal parts with high-grade, detergent-resistant, non-abrasive
automobile wax. Do

not

wax textured surfaces.

Adhere to the following guidelines for waxing the pumps/dispensers:

• Before waxing, clean the pumps/dispensers, and touch up deep

scratches on painted surfaces.

• Wax painted surfaces with a high grade, long lasting, detergent

resistant, non-abrasive automobile wax.

CAUTION

Textured surfaces of Gasboy Atlas pumps/dispensers can become damaged if
waxed.

Waxing the textured surfaces can damage the units, adversely affecting the
appearance of the units.

Do not wax textured surfaces.

CAUTION

The main and PPU displays of Gasboy Atlas pumps/dispensers can become
difficult to read if waxed.

Waxing the main and PPU displays may impede a customer’s ability to read
the display because the display may appear hazy.

Do not wax the displays on the pump/dispenser.

Owner

Wash pump/
dispenser

As needed.

Note: Gasboy

recommends
more frequent
cleaning for
pumps/
dispensers
located in
salty or
corrosive
environments,
such as near
the ocean or
near pollution
sources.

Clean with automobile cleaning products. Clean plastic surfaces with
water and mild detergent. Do

not

wash with a hose. Do not use window

cleaners with ammonia on Electronic display windows.

Adhere to the following guidelines while washing pumps/dispensers:

• Clean and protect your equipment with automobile cleaning and

protection products.

• Clean plastic surfaces and polycarbonate graphics with a solution of

water and mild detergent.

• Use a soft cloth, paper towel, or sponge to clean displays separately.

Window cleaners are preferred.

Wash pumps/dispensers by hand, or use a hose nozzle set to a fine
gentle spray.

CAUTION

Moisture can damage the internal components of a pump/dispenser.

Internal components exposed to moisture may not operate correctly.

Do not use a pressure washer to clean the pumps/dispensers.

Owner

Display windows

As needed

Clean with non-abrasive cloth or paper towel and a commercial glass
cleaner. Do not use window cleaners with ammonia. Do not wax or use
any abrasive cleaners or fuels.

Owner

Components

Recommended
Frequency

Recommended Maintenance

Who Performs the
Inspection/Repair

Содержание atlas



























































































































































































































Результаты поиска

Содержание atlas

Отзывы:

Gasboy atlas, Руководство по обслуживанию, Страница: 42 / 218

Результаты поиска

Содержание atlas

Отзывы: