Gap Diagnostic IIDTool Pro, Руководство пользователя

Страница: 109 / 194

108 109
IIDT
ool
GAP Diagnostic 2019-07-15 All Rights Reserved
User Manual : Version 33, Firmware V3.0
Option 2 : Calibrating the right sensor and using the left side as reference.
6. The correct calibration is achieved by adjusting only the right side of the vehicle to match the
left. Calculate the new calibration value for the right side using the formula below. To make the
calculation, fill in the table below or on the
EAS Calibration Aid
with the values noted for front
corners and repeat for rear corners.
All values are in millimetres
Front
Current Calibration Values Current Height Values Measured Heights
Front Right
X= A= C=
Front Left
B= D=
Table 32. Required data, front right calibration
Rear
Rear Right X= A= C=
Rear Left B= D=
Table 33. Required data, rear right calibration
Calibration Formula for right-hand adjustment
All values are in millimetres
New Calibration
Value Front Right
=
Old Calibration
Value Right X
+
Current
Height A
-
Current
Height B
-
Measured
height C
+
Measured
height D
= + - - +
New Calibration
Value Rear Right
=
Old Calibration
Value Right X
+
Current
Height A
-
Current
Height B
-
Measured
height C
+
Measured
height D
= + - - +
Table 34. Calculus, new left side calibration value
*Please remember: when a value minus a negative value, the minus in the equation becomes a plus
(subtracting a negative number = adding a positive number). For example, 3 - -3 = 6