62
GAP Diagnostic 2019-07-15 All Rights Reserved
User Manual : Version 33, Firmware V3.0
2.9.3 Activation using the Integrated (
II
) or PC Interface
Prerequisites
• Having completed the general prerequisites for activation mentioned before
• Be aware of warnings and particularities
• Having the necessary tools to note the activation code
• Have access to a personal computer with an internet service (for one of the stages)
Steps to activate the IIDTool using the Intergrated (
II
) or PC Interface.
1- Turn ignition ON without starting the engine (turning the key to “ON, II” or press the “start en-
gine” button without simultaneously pressing the brake pedal).
2- Connect the IIDTool on the OBDII connector
3- Wait 30 seconds until the “ IIDTool Ready ” message is displayed on the instrument pack screen.
This delay is caused by the scan process which detects which ECUs are present.
4- Lunch the Integrated Interface by pressing on the button (
). If the PC interface
), once connected to the tool click on .
5- Reach the activation code by browsing through the menus as follows : Menu ->
IIDTool Config
-> Unlock Code
6- Note the 10 character activation code.
Note :
It is possible to scroll the code from left to right if required with the and buttons.
)
8- Once the unlock code is received, return to the vehicle, repeat steps 1 to 5
9- Enter the Unlock Code using the corresponding commands (
section 2.8.3, section 2.8.4 and
)
10- Once the unlock code is entered correctly, the IIDTool will backup the suspension calibration
and Car Configuration File (CCF). A confirmation of execution will be displayed.
The user has now access to advanced programming functions and data backup.
