174
GAP Diagnostic 2019-07-15 All Rights Reserved
User Manual : Version 33, Firmware V3.0
Regular non-Bluetooth IIDTool,
first hardware version:
Usage of the PC-based controller is man-
datory. The IIDTool must be connected to the computer until the process is completed. The option
will be displayed on your computer screen (re-flash menu). Please consult
of this user
manual for more details on the PC-based interface. If using a laptop, make sure the battery charger is
connected. Close all programs, disable all automatic updates and screen saver. The computer does
not need to be connected to the internet.
Regular non-Bluetooth IIDTool,
second hardware version:
The function is embedded in the IIDTool
firmware. User can choose between the regular Integrated Interface or PC-based interface. When
using a laptop, make sure the battery charger is connected. Close all programs, disable all automatic
updates and screen saver. The computer does not need to be connected to the internet.
Steps, IIDTool
BT
,
Pro
and regular IIDTool first hardware version
L322-2005 and L322-06
• Select the Bluetooth re-flash and follow the instructions on screen.
• The process is done with the key to the Accessory position (I). Make sure that the headlights are
turned off and that any unnecessary lights or accessory are turned off also.
• Upon completion, turn the key to the ON position (II) and follow the instructions on screen.
L319-04 and L320-05
• Select the Bluetooth re-flash and follow the instructions on screen.
• The process is started with the key to Ignition, position II. Once re-flashing has begun (indicated
on the Navigation screen), the key can be removed. It can also be left in position II in which
case the user should keep an eye on the vehicle and wait until completion (the instrument pack
will wake up). Failure to turn the key to the OFF position after the procedure is completed (or if
a failure occurred) will lead to a battery drain if not connected to a power supply.
• Upon completion, turn the key to the ON position (II) and follow the instructions on screen.
Steps, regular IIDTool second hardware version
• Select the Bluetooth re-flash and follow the instructions on screen.
• The process is started with the key to Ignition, position II. Once re-flashing has begun (indicated
on the Navigation screen), the key can be removed. It can also be left in position II in which
case the user should keep an eye on the vehicle and wait until completion (the instrument pack
will wake up). Failure to turn the key to the OFF position after the procedure is completed (or if
a failure occurred) will lead to a battery drain if the vehicle’s battery is not connected to a power
supply.
• Upon completion, turn the key to the ON position (II) and follow the instructions on screen.
Keep an eye on the vehicle and wait until completion (the instrument pack will wake up). Failure to
remove the key from the ignition after the procedure is completed (or if a failure occurred) will lead to
a battery drain if not connected on a power supply.
