Gap Diagnostic IIDTool Pro, Руководство пользователя

Страница: 187 / 194

186 187
IIDT
ool
GAP Diagnostic 2019-07-15 All Rights Reserved
User Manual : Version 33, Firmware V3.0
4.14 IIDTool Config
4.14.1 Find ECUs
Upon first use (read or clear fault), the IIDTool will scan the communication buses and note which
ECUs are responding. When scanning is complete, the number of ECU found will be displayed. The
resulting list is stored in the IIDTool memory for up to 10 vehicles (except for the IIDTool Pro which has
no limit). If a new ECU is installed or removed from the vehicle, the Find ECU function shall be used to
add or remove the ECU from the list.
4.14.2 II Voltage displayed
When this feature is enabled, the IIDTool is connected and the user has not called up the IIDTool menu,
the battery voltage will be displayed.
4.14.3 Enter unlock code
You can unlock the advanced programming functions on your IIDTool for future uses on other vehicles
by entering an unlock code here. First, enter the unlock code menu, you will see a ten hexadecimal
character activation code. II If you already have an unlock code, press the button once more and
enter the code.
If you don’t have an unlock code or need a new one for adding one or more vehicles, please contact
us or visit our website to buy additional VIN’s license(s). With your activation code and VIN licence(s),
you will be able to retrieve your unlock code on our website (
section 2.9
).
After entering your unlock code, when connecting to another vehicle that’s never been unlocked, you
will be asked if you want your IIDTool to be unlocked for this particular vehicle.