Fukuda Denshi Dynascope 8000 Series, Руководство по обслуживанию

Страница: 18 / 154

iv
Safety Precautions for Safe Operation of Medical Electrical Equipment
Precautions for Safe Operation of Medical Electrical Equipment
WARNING

Do not disassemble or remodel the equipment.
CAUTION

Users should have a thorough knowledge of the operation before using this equipment.

Do not use the equipment in an environment where protective earth and wiring is
questionable.

Precautions about the Location of Installation and Storage of the Equipment

Set the monitor to the user's intended position where the user can easily recognize the visual and audible
monitoring conditions. Normally it is recommended to set at a distance of 1m from the user.

Install or store in a place where the equipment will not be exposed to splashing water.

Install or store in an area where environmental conditions such as atmospheric pressure, temperature, humidity,
ventilation, sunlight, dust, sodium, and sulfur will not adversely affect the system.

Place the equipment on a stable surface where there is no inclination, vibration, or shock (including during
transportation).

Do not install or store in an area where chemicals are stored or gases are evolved.

Verify the power frequency, voltage and allowable current (or power consumption).

Ensure the grounding is proper by connecting the accompanying power cable to the hospital grade outlet.

Make sure to secure the equipment using a trolley or stand.

Do not place the equipment or accessories in any position that might cause it to fall on the patient.

Precautions Before Using the Equipment

Verify the power voltage. Charge the battery pack fully before operating the system with the battery pack.

Check the cable connection and polarity to ensure proper operation of the equipment.

Make sure the power system has adequate earth ground.

Ensure that all cables are firmly and safely connected.

Pay special attention when the equipment is used in conjunction with other equipment as it may cause
erroneous diagnosis and danger.

Precautions During Using the Equipment

Always observe the equipment and patient to ensure safe operation of the equipment.

If any abnormality is found on the equipment or with the patient, take appropriate measures under the safe
conditions, such as ceasing operation of the equipment.

Do not allow the patient to come in contact with the equipment.

On start-up of the system, verify that the start-up tone generates and alarm indicator lights.

For the connectors which are not Type BF, CF applied part, do not touch them and the patient at the same time.

Precautions After Using the Equipment

Unplug all the cables from the patient before turning off the power.

When unplugging the cables, do not apply excessive force by pulling on the cord. Pull by the connector part
of the cable.