Fukuda Denshi Dynascope 8000 Series Скачать руководство пользователя страница 63 | Manualshive

Страница: 63 / 154

background image

3-1

Chapter 3 Using the External Media

Inserting the USB Memory/SD Card

Chapter 3 Using the External Media

By using the USB memory or SD card, setup data can be transferred between the patient monitors. The screen shot
of the home display can be saved on the USB memory by pressing the [Print] key. The saved data on the USB
memory can be viewed/printed on the PC.

By using the optional SD card (FSD-8GA: 8GB, SD-16G: 16GB), full disclosure waveform data can be saved.
Also, by using the "Transfer Full Disclosure Waveform Card" function, the patient data and setup data can be
transferred to other DS-8007 using the SD card.

Inserting the USB Memory/SD Card

1

Insert the USB memory to the USB slot.

Or, insert the specified SD card into the SD card slot.

NOTE



Make sure to use the USB memory formatted on the PC. (FAT32)



SD Card Message

When the SD card is inserted, a message may be displayed.

Data Backup/Copy Using the USB Memory/SD Card

This section explains about the backup and copy procedure of the setup data using the USB memory/SD card.

Setting all the monitors in the same ward to the same alarm settings and display configuration may take large amount
of time. This process can be simplified by performing the setup on one monitor, and copying the data to other
monitors using the USB memory/SD card.

CAUTION



Make sure to use the specified SD card.



If unspecified SD card is inserted, the full disclosure waveform data cannot be saved.



To backup/copy the data, use the media with capacity of 512 MB or more.

Message

Operation

This card is not for review data transfer.
Format the card.

If the full disclosure waveform card used on other DS-8007 is inserted to this unit, this
message will be displayed.
To erase the full disclosure waveform data of other unit, and to use as full disclosure
waveform card on this unit, press the [Yes] key.
If [No] is selected, the card can be used only for data transfer on this unit.

This card is for review data transfer. Do
you want to use this card?

If "Transfer Full Disclosure Waveform Card" process for the SD card has been
performed on other unit, and inserted to this unit, this message will be displayed.
If [Yes] is selected, the patient data and setup data of other unit will be overwritten to
that of this unit, and the SD card will function as full disclosure waveform card on this
unit.
If [No] is selected, the card can be used only for data transfer on this unit.

SD card is inserted. Format the card.

If the card not formatted on the DS-8007 is inserted, this message will be displayed.
If [Yes] is selected, the card will be formatted to be used as full disclosure waveform
card.
If [No] is selected, the card can be used only for data transfer on this unit.

«
...
61
62
63
64
65
...
»

Содержание Dynascope 8000 Series



























































































































































Отзывы:

Нет отзывов

Похожие инструкции для Dynascope 8000 Series

Бренд: ABB Страницы: 11

Бренд: Parata Страницы: 40

Бренд: CAIRE Страницы: 2

Бренд: JB Systems Страницы: 7

Бренд: 3B SCIENTIFIC PHYSICS Страницы: 36

Бренд: 3A HEALTH CARE Страницы: 16

Short/cut 2000 Audio Editor

Бренд: 360 Systems Страницы: 4

Бренд: Quincy lab Страницы: 4

Бренд: ACDC Страницы: 4

FreeStyle Comfort

Бренд: CAIRE Страницы: 33

Aspect Q-CARD 100-4T

Бренд: idi Страницы: 38

Бренд: Konica Minolta Страницы: 32

Бренд: Kamikaze Страницы: 112

Бренд: KAM Страницы: 2

ActiveFinder One

Бренд: LaserLiner Страницы: 92

Бренд: S.R.Smith Страницы: 8

Бренд: S.R.Smith Страницы: 23

NavBoard ZipFlip

Бренд: S&S Precision Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды