Fukuda Denshi Dynascope 8000 Series, Руководство по обслуживанию

Страница: 143 / 154

9-3
Chapter 9 Maintenance Check Daily and Periodic Check
CAUTION

If the CO
2
gas calibration is not performed at a specified interval, CO
2
measurement
accuracy may be affected and also subsequent gas calibration may not be possible.
06 Alarm Sound Check the alarm sound by pressing the [Test]
key. ([Menu] > [Tone/Volume]) The alarm sound should be properly generated
from the speaker.
07 Recorder Unit
(When HR-800 is
used) Visually check the installed condition of the
paper. The paper should be correctly installed.
Neither damage nor discoloration should be found.
Check if the printing operation is smooth, and
no abnormal sound is occurring. The operation should be smooth and no abnormal
sound should occur.
08 When the DSA-82
is used Turn ON the power of the host monitor, and
check whether the power supply LED lights. The power supply LED on the front side of the
adapter should light.
09 SD Card for Full
Disclosure
Waveform
(Optional) Visually check the full disclosure waveform
display. Connect the ECG cable.
ECG waveforms should be displayed with the full
disclosure waveform function.
No. Check Items Check Procedure Criteria
4. Other Items
01 Periodic
Replacement
Parts Check the number of measurements of the
NIBP unit. It should not exceed 100,000 times.
Check the number of charging/discharging
times or the first usage date of the BTO-008
Lithium-Ion Battery Pack. The number of charging/discharging times should
not exceed 300 times, or usage duration should not
exceed one year.
Check the operation hours of the CO
2
unit
(HCP-810/HCP-820).
It should not exceed 30,000 hours.
02 Periodic Inspection Check the date of the previous periodic
inspection. Should be within one year.
03 Operation Manual Check that accompanying documents
(operational manual, etc.) are stored in
specified location. Should be stored in specified location.
No. Check Items Check Procedure Criteria