Fukuda Denshi Dynascope 8000 Series, Руководство по обслуживанию

Страница: 136 / 154

8-4
Chapter 8 Cleaning/Disinfecting/Storing Cleaning the Equipment and Sensors
BP Transducer
Disinfect the blood pressure transducers according to the manufacturer’s guidelines.
Do not reuse / re-sterilize the disposable type transducers.
SpO
2
Sensor
Disinfect the SpO
2
sensor according to the manufacturer's guidelines. Do not reuse/resterilize the disposable SpO
2
sensor.

Nellcor Sensor

Do not soak the sensor in water or antiseptic solution.

Wipe the DURASENSOR with disinfectant such as 70% alcohol. Do not sterilize by irradiation, steam, or
ethylene oxide.

OxiMax is a single-patient use type sensor. Do not reuse or resterilize.

Masimo Sensor

Do not soak the sensor or patient cable in water or antiseptic solution.
(Sensors and connectors are not water-proof.)

Do not sterilize the sensors and cables by irradiation, steam, or ethylene oxide.

The Masimo disposable sensor can be reused on the same patient if the light emitting and receiving part is
clean, and if it is still adhesive to the skin.
For most of the sensors, the adhesiveness will return by cleaning the sensor with alcohol and completely drying
it before applying it to the patient. For details of the cleaning procedure, refer to the instruction manual of the
sensor.

Disinfect the Masimo reusable sensor and patient cable according to the manufacturer's guidelines.

When cleaning the Masimo reusable sensor and patient cable, disconnect them from the main unit, and follow
the procedure below.
1
Wipe the sensor and cable using 70% isopropyl alcohol cotton.
2
Dry it completely with air before reusing.
Temperature Probe

Disinfect the temperature probe according to the manufacturer's guidelines.

When cleaning the relay cable, follow the procedure below.
1
Wipe the cable using 70% isopropyl alcohol cotton.
2
Dry it completely with air before reusing.