Fujitsu M2488, Руководство по эксплуатации продукта

Страница: 388 / 528

CHK XX ERROR CODES M2488 PRODUCT GUIDE
E-2 CG00000-011503 REV. A April 1997
29 CLEANING CARTRIDGE SENSOR FAILURE IN POWER UP
2A
CATCH ARM OPEN TIMEOUT ERROR
2B CATCH ARM CLOSE RETRIES EXHAUSTED
2C CATCH ARM OPEN RETRIES EXHAUSTED
2D CATCH ARM OPEN AND CLOSE SENSOR BOTH ON
2F UNDEFINED INTERNAL COMMAND
30 FEEDER MOVE FORWARD RETRIES EXHAUSTED
31 FEEDER MOVE BACKWARD RETRIES EXHAUSTED
32 CARTRIDGE POSITIONED ON CARRIER INCORRECTLY
33 MOTION COMMAND DURING SERVO OFF
34 TOO LONG LENGTH TAPE LOADED
36 CARRIER SENSORS: FRONT/REAR AND UNFEED ALL ON
37 OUT OF RANGE IN EOT LOCATION TABLE
38 CARRIER SENSORS: FRONT/UNFEED SENSORS BOTH ON
39 TOO LOOSE WRAP TAPE CTG IS LOADED OR ABNORMAL REEL CLUTCHING
3A REAR CARRIER SENSOR ALWAYS ON
3B UNFEED SENSOR ALWAYS ON
3D WRITE TYPE COMMAND WITH FILEPROTECT
3E FRONT CARRIER SENSOR ALWAYS ON
3F UNFEED SENSOR NOT ON
40 LOADER MOTION TIME OUT
41 TAPE PATH SENSOR <CT> & <MR> BOTH ON
43 LEADER BLOCK CANNOT BE PULLED OUT FROM CART.
44 CARTRIDGE LOAD RETRY EXHAUSTED
45 TAPE THREAD RETRY EXHAUSTED
46 TAPE PATH HOME SENSOR ALWAYS ON ERROR
47 THREADER ARM CANNOT MOVE TO HOME POSITION AT POWER UP
48 CARTRIDGE NOT EJECTED
49 TOO LOOSE OR BROKEN TAPE IS LOADED
4A THREADING TIMEOUT
4B UNTHREAD TIME OUT
Table E-1. CHK xx Error Code Descriptions (Continued)
CHK XX
CODE
DESCRIPTION