Fujitsu M2488, Руководство по эксплуатации продукта

Страница: 421 / 528

M2488 PRODUCT GUIDE DIAGNOSTIC TESTS AND ERROR CODES
April 1997 CG00000-011503 REV. A F-21
0x07
0x04 SPC to Data Buffer DMA test 0x09 Incorrect SCSI bus status during diagnostic
data transfer while expecting REQ de-asser-
tion
0x0A SPC reported an incorrect data transfer length
0x0B Record/Buffer manager did not report suc-
cessful completion for the DMA transfer
0x0C Data miscompare detected in SPC MSC
buffer after DMA data transfer completed
0x10 SPC did not generate an interrupt request
0x11 SPC interrupt was not detected at the Interrupt
Request Controller
0x12 The SPC interrupt was cleared while clearing
the Interrupt Request Controller.
0x13 An incorrect SPC interrupt/step code was
reported
0x14 The SPC interrupt request could not be
cleared
0x20 SPC did not generate an interrupt request
0x21 SPC interrupt was not detected at the Interrupt
Request Controller
0x22 The SPC interrupt was cleared while clearing
the Interrupt Request Controller.
0x23 SPC interrupt/step code did not report Com-
mand Complete
0x24 The SPC interrupt request could not be
cleared
0x07 0x05 SPC MPU bus parity test 0x01 SPC reported incorrect status
0x02 Bad SCSI bus status detected waiting for REQ
assertion during diagnostic data transfer
0x03 Incorrect SCSI bus status during diagnostic
data transfer while expecting REQ de-asser-
tion
0x04 SPC did not generate an interrupt request
0x05 SPC interrupt was not detected at the Interrupt
Request Controller
0x06 The SPC interrupt was cleared while clearing
the Interrupt Request Controller.
0x07 SPC interrupt/step code did not report MPU
Parity Error as expected
Table F-9. Routine 7 - SCSI Protocol Controller Diagnostic Error Codes (Continued)
ROUTINE TEST TITLE
ERROR
CODE
DESCRIPTION
DIA
GNOS
TIC
TES
TS
AND E
R
R
O
R
C
O
DES