M2488 PRODUCT GUIDE
ASC/ASCQ
April 1997
CG00000-011503 REV. A
B-1
APPENDIX B
ASC/ASCQ
The Additional Sense Code (ASC) and the Additional Sense Code Qualifier (ASCQ) are described in
Table B-1 by Sense Key and in Table B-3 by ASC/ASCQ. These are the ASC and ASCQs returned in
bytes 12 and 13 of the error code sense formats described in paragraph 8-3.1 on page 8-4. The sense
keys, which are mapped to the ASC/ASCQs, are described in Appendix A. The Advised Action column
indicates action codes which are described in Table B-2.
Table B-1. ASC and ASCQ Description (by Sense Key)
SENSE
KEY
ASC/ASCQ
DESCRIPTION
ADVISED
ACTION
0
00
00
No additional sense available
7
00
01
Filemark detected
7
00
02
End-of-Medium detected
7
00
04
Beginning-of-Medium detected
7
A0
xx
Internal Software Error: Unsupported ERPA code xx encountered by error process-
ing software. Report ERPA code to Product Support Engineer.
9
1
00
17
Clean Requested. NOTE: This ASC/ASCQ can only be generated when feature
mode FT5, bit 5 (0x20) is set to one as described in the configuration settings in the
M2488 User’s Guide.
3
0C
00
Recovered write error
3
17
01
Recovered read data with retries
3
44
00
Recovered internal hardware error
3
5B
02
Log counter at maximum
6,3
A0
xx
Internal Software Error: Unsupported ERPA code xx encountered by error process-
ing software. Report ERPA code to Product Support Engineer.
9
2
04
00
Logical unit not ready, cause not reportable
5,4
04
01
Not ready, in process of becoming ready. NOTE: This ASC/ASCQ can only be gen-
erated when feature mode FT4, bit 5 (0x20) is set to one as described in the config-
uration settings in the M2488 User’s Guide.
4
04
03
Load assistance required
5
3A
00
Not ready, medium not present. NOTE: This ASC/ASCQ can only be generated
when feature mode FT5, bit 4 (0x10) is set to one as described in the configuration
settings in the M2488 User’s Guide.
5
53
00
Unload failure
5
53
01
Unload failure
5
3
00
00
No additional information
7
00
02
End-of-Medium detected
1
04
00
Manual unload and buffered write data exists
5,2
04
03
Load assistance required and buffered write data exists
5,2
0C
00
Write error
2
11
00
Unrecovered read error
2
14
04
Block sequence error
2
30
00
Incompatible medium installed - attempting 36-track writes over 18-track data
away from BOT
1
30
02
Incompatible format
1
33
00
Tape length error
1
53
00
Load failure occurred and buffered write data exists
5,2
53
01
Manual unload failure occurred and buffered write data exists
5,2
Содержание M2488
