PAGE 1 OF 3
0920 IS-12707
S-12707, S-14247
OCTAGON BULK BIN
1-800-295-5510
uline.com
BIN ASSEMBLY
LID ASSEMBLY
1. Begin by "pre-breaking" (folding) all vertical scores.
2. Stand the bin on end with the flaps on top.
(See Figure 1)
3. Fold the two largest flaps in toward each other until
the ends meet. Align the edges and press flat.
4. Fold the smaller flaps over. Align the smaller flaps
within the notches of the larger flaps.
5. Finally, holding one of the smaller flaps down with
one hand, flip the bin over so the flaps are on the
bottom. Bin is ready for filling.
1. Begin by "pre-breaking" (folding) all scores.
2. Fold up all four sides, folding ends in to form the
angled corners. (See Figure 2)
3. Fold corner flaps up and over the adjoining end
flaps and tuck into slit. Lid is complete.
Figure 1
Figure 2
Para Español, vea página 2.
Pour le français, consulter la page 3.
