Fujitsu M2488, Руководство по эксплуатации продукта

Страница: 316 / 528

MAINTENANCE AND SERVICING M2488 PRODUCT GUIDE
8-6 CG00000-011503 REV. A April 1997
15 7
1
0
The meaning of the sense-key specific field depends on which sense key is returned and
whether the Sense-Key Specific Valid (SKSV) bit is a one. If the sense key field is set to
ILLEGAL REQUEST and the SKSV bit is one, the sense-key specific field is defined as
shown in bytes 15 through 17.
If the SKSV bit is a zero, the field is not defined.
16-17 The field pointer field indicates which byte of the CDB or of the parameter data was in
error. Bytes are numbered starting from zero as shown in the tables describing the com-
mands and parameters. When a multiple-byte field is in error, the pointer points to the
most significant byte of the field.
18 0-7 The format byte defines the format of bytes 20 - 43. See Table 8-15 on page 8-15 to iden-
tify the format of additional sense.
19 0-7 Byte 19 identifies the error recovery procedure action (ERPA) code. The codes are
described in Appendix C.
20-43 The format of sense bytes 20-43 varies depending on whether the sense information is
from the SIC, FMT, drive, or hardware registers. See Table 8-15 on page 8-15 to identify
the format of its additional sense.
Table 8-3. Error Code 71 - Sense Format (deferred error reporting)
BITS
BYTES 7 6 5 4 3 2 1 0
0
Valid 1 1 1 0 0 0 1
1 Segment Number (00h)
2 FMark EOM ILI Rsvd Sense Key
3-6 Information Bytes
7 Additional Sense Length = 24h
8-11
00000000h (SCSI-2 Command Specific Information Bytes)
12
Additional Sense Code
13 Additional Sense Code Qualifier
14
FRU Code (00h)
15-
17
SKSV
000000h (SCSI-2 Sense-Key Specific)
18 Format of additional sense
19
Host ERPA
20-43 Additional Sense Bytes as Defined by the Format Indicated in Byte 18.
Table 8-2. Error Code 70 Sense Format Field Description (Continued)
BYTE BIT VALUE DESCRIPTION