Fujitsu M2488, Руководство по эксплуатации продукта

Страница: 297 / 528

M2488 PRODUCT GUIDE MEDIA CHANGER COMMANDS
March 1997 CG00000-011503 REV. A 6-37
** NOTE **
All fields in this page are reported as NOT changeable. The default
values are the same as the current values shown above and
described below.
6-3.3 Page Code 1Eh, Transport Geometry Parameters
** NOTE **
All fields in this page are reported as NOT changeable and default to
a value of zero.
Table 6-45. FACL Page Code 1Dh, Element Address Assignments Field Description
BYTE BIT VALUE DESCRIPTION
2-5 000Eh There is one Medium Transport Element and it is referred to as address 000Eh.
6-9 0011h The First Storage Element address is 0011h. The First Storage Element Address is
0011h. Storage Elements are the “slots” that may hold tape cartridges in a Maga-
zine. There are 31 logical storage elements. An FACL has seven Storage Elements.
10-13 0001h There is one Import/Export Element address at 0001h. This is the Magazine Port.
14-17 000Dh There is one Data Transfer Element address at 000Dh. This is the Cartridge load
port in the MTU.
Table 6-46. Page code 1Eh, Transport Geometry Parameters
BITS MODE SENSE
DEFAULT
VALUES
BYTES 7 6 5 4 3 2 1 0
0 PS * Reserved Page Code 9Eh
1 Additional Page Length 02h
2 Reserved Rotate 00h
3 Member Number in Transport Element Set 00h
* The PS bit must be set to 0 on a MODE SELECT command.
Table 6-47. Page code 1Eh, Transport Geometry Parameters Field Description
BYTE BIT VALUE DESCRIPTION
2 0 0 This Element is not able to rotate the medium so the Rotate bit is 0.
3 00h There can be only one Medium Transport Element (Magazine) in the system at any
given time and it is defined here.