Fujitsu M2488, Руководство по эксплуатации продукта

Страница: 464 / 528

DIAGNOSTIC TESTS AND ERROR CODES M2488 PRODUCT GUIDE
F-64 CG00000-011503 REV. A April 1997
0x20
0x13 LWR2 - Detect Hard Error - 36
Track 0x40 RSVP did not respond while looking for
DBOB or IBG.
0x20 0x14 No Signal Test 0xC4 Failed to Detect No Sig TJ
0xC5 Failed to Detect Write Error TJ
0x20 0x15 LWR3 - External Loop Write to
Read 0x30 Wrap Mark not detected
0x32 DBOB TJ not active
0x20 0x16 LWR0 - Seismic CRCA Error
Detection 0x01 Failed to Detect IBG - check INLWR or
DBLK
0x02 Failed to Detect DBOB - check DBLK
0x03 Failed to Detect Phase OK
0x04 Failed to Detect Preamble - check RDSTT
0x05 Failed to Detect Postamble
0x06 Failed to Detect Read End
0x07 Phase OK not reset
0x08 Failed to Detect Write Block End
0x20 0x17 LWR2 - Seismic SDFT Data Pat-
tern 0x20 RSVP failed to Respond
0x21 DATA Xreg Miscompare - RSVP not Ready
0x22 DATB Xreg Miscompare - RSVP not Ready
0x23 FHC1 time-out - DBOB not detected by
RSVP
0x24 FLC0 time-out - RSVP detected Long IBG
0x25 FHC2 or FLC2 Time Out - Slow End of Data
Block
0x26 Lost DBOB prior to PHOK or while waiting
for DPOST
0x27 PHOK not seen in time
0x28 Time-out waiting for DPRE
0x29 Lost DBOB waiting for DPRE
0x2A Time-out waiting for DPOST
0x2B PHOK on after Read End
0x2C RSVP Dead Man time-out
Table F-16. Routine 20 - Loop Write to Read Diagnostic Error Codes (Continued)
ROUTINE TEST TITLE
ERROR
CODE
DESCRIPTION
DIA
GNOS
TIC
TES
TS
AND E
R
R
O
R
C
O
DES