Fujitsu M2488, Руководство по эксплуатации продукта

Страница: 386 / 528

FAULT SYMPTOM CODES M2488 PRODUCT GUIDE
D-6 CG00000-011503 REV. A April 1997
9Axx
RDE is not equal to 0 at RD operation in which xx =
Bit 0 - Uncorrectable error
Bit 1 - Multiple track error
Bit 2 - Skew error
Bit 3 - Drop out error
Bit 4 - CRC error
Bit 5 - Postamble error
Bit 6 - Start read check
Bit 7 - End of data check
(Bit 0 = MSB, Bit 7 = LSB) 23 01
9C00 Detected RBE on READ 23 01
9D00 RSVP time-out waiting for block or mark 31 01
9D05 No IBG after good RDEND during readback 25 04
9D10 Time-out waiting for RSVP response 47 04
9D11 RSVP time-out during readback 25 04
9E00 DID detected while block read 23 04
9E10 BID Miscompare on read 41 07
BC1D Invalid command sent to RSVP 47 03
E003 Read overflow detected in fdxs 47 03
E005 fdxs errors 47 03
E006 Formatter Packet Processor detected error at end of read transfer 23 02
E010 End of Transfer not detected 47 03
E100 Read sddp, fdxs err, crc, ovrn, par 47 03
ED00 Read clear block on 36trk edrc tape 23 02
ED02 Not a multiple of 32 bytes 2C 02
Table D-2. Formatter Error Recovery (Continued)
F.S.C. # DESCRIPTION E.R.P.A.
BYTES
29-39
GROUP