Fujitsu M2488, Руководство по эксплуатации продукта

Страница: 491 / 528

M2488 PRODUCT GUIDE MTU DIAGNOSTIC SPECIFICATIONS
April 1997 CG00000-011503 REV. A H-9
H-4.4 COMBINATION : Running test by combining up to ten commands
The tests can be set using the following parameters
:
For example:
After end of 5th group, command code is set following:
DIAG command code is set “0x0A”
diag_parameter 6 is set “2”
execute count is set “3”
This diagnostic test repeats execution of diagnostic test
3 times from group 2 to group 5.
H-4.5 Error reset command ------- CMD CD : 0x70 or 0xF0
If A error is reported by the MTU during diagnostic test, it is necessary to issue this command.
1) #:F-READ
(Forward read): Forward read run
It is same “FWD READ” test of READ/WRITE test. ------- CMD CD : 0x01
2) #:B-READ
(Backward
read): Backward read run
It is same “BWD READ” test of READ/WRITE test. ------- CMD CD : 0x02
3) #:WRITE
(Write): Write operation
It is same “WRITE” test of READ/WRITE test. ------- CMD CD : 0x03
4) #:D.S.E. (DSE): DSE operation
It is same “D.S.E.”test of READ/WRITE test.
------- CMD CD : 0x04
5) #:LOCATE
(Locate): High-speed tape run to a specified sector
It is same “LOCATE” test of READ/WRITE test. ------- CMD CD : 0x05
6) #:REWIND
(Rewind): High-speed tape run to the wrap-1 BOT position
It is same “WRAP1 BOT” test of READ/WRITE test. ------- CMD CD : 0x06
7) #:UNLOAD
(Unload): Unloading ------- CMD CD : 0x07
8) #:LOAD (Load): Loading next tape from a magazine. (only ACL/FACL) ------- CMD CD : 0x08
9) #:EJECT
(Eject): Ejection (only ACL/FACL) ------- CMD CD : 0x80
10) TAPE PATH: Tape run between the specified start position and end posi-
tion.
It is same “TAPE PATH” test of READ/WRITE test. ------- CMD CD : 0x0B
11) #:REPEAT
(Running
repeat):
Repetition of run
This diagnostic test repeats execution of diagnostic test
from a specified test. ------- CMD CD : 0x0A
DIAG parameter 6: Specify a repeat start position.
execute count: Specify an execution count. Specify a command execution count from 1 to 99,999.
(When 0 is set, not repeat)
12) #:END
(Running end):
End of run
This is end of diagnostic test. ------- CMD CD : 0x0C
or 0xFF