Fujitsu fi-7300NX, Руководство оператора

Страница: 36 / 321

● Network Encryption
Select whether or not to encrypt network communications.
●
PaperStream NX Manager
Set this item to use PaperStream NX Manager.
Specify [Host Name/IP address] and [Port Number].
●
Scanner Central Admin Server
You can set the Scanner Central Admin Server to use PaperStream NX Manager.
Set this item to monitor the scanners or perform a single operation on them at the same time with Scanner
Central Admin Server.
Specify [Host Name/IP address] and [Port Number].
●
Startup mode
Select a startup mode for the scanner.
● Scanner name
Set a scanner name.
When you finish setting the relevant items, the screen indicates that the setting process is complete.
5
Check the items that are set and press the [Complete] button.
6
Connect the computer, on which the scanner is to be used, to the network.
For details about how to connect the computer to the network, refer to the computer manual.
7
Check the connection status of the network.
For details, refer to
Checking the Network Connection for the Scanner (page 50) .
8
Install necessary software to the computer which is to be connected to the scanner.
For details about the software, refer to
Installing Software (page 51) .
Prepare the bundled Setup DVD-ROM.
HINT
When using PaperStream NX Manager, you do not need to install software from the bundled Setup DVD-
ROM. Install a necessary software by referring to the PaperStream NX Manager User's Guide.
a
If an old version of the software is installed, uninstall it first.
For details, refer to
Uninstalling the Software (page 316) .
b
Insert the bundled Setup DVD-ROM into the DVD drive.
The [fi Series Setup] window appears.
c
Start the installation by following the instructions displayed in the screen.
It is recommended that you select [Installation (Recommended)].
d
Configure the settings to use the scanner on the computer.
Use fi-7300NX Scanner Selection Tool to select a scanner to be used.
For details, refer to the fi-7300NX Scanner Selection Tool Help.
fi-7300NX Scanner Selection Tool automatically starts up when the installation of the software is
complete.
Scanner Setup
36